Concrete Mixer Drum
Selection begins with numbers that can be verified. The table below lists the build and interface items for this attachment, followed by the checks that decide whether it belongs on a particular machine.
Carrier capacity, hydraulic output, mounting geometry and spares availability are the four columns of the check for this concrete mixer drum. The workshop signs off mounting = universal quick-attach plate for this concrete mixer drum during the final inspection.
Grease points on the concrete mixer drum are counted and marked, then transferred to the handover checklist. The concrete mixer drum is confirmed for hose abrasion at every pivot after the first working shift.
Steel grade and plate thickness for the concrete mixer drum are noted on the build sheet, individually from the wear items. For procurement purposes drum is stated as welded cone-cylinder with internal fins on the concrete mixer drum data sheet.
Inspectors record hydraulic circuit as standard auxiliary once the rotating mixer drum, drum mixer attachment has been assembled and painted.
For the rotating mixer drum, drum mixer attachment, drive is fixed at hydraulic motor via chain or gear before the mounting interface is drawn. The concrete mixer drum is supplied with drum recorded as welded cone-cylinder with internal fins rather than as a class average.
For this rotating mixer drum, drum mixer attachment the interface drawing shows the plate, the wedge pockets and the hose exit, and all three are read on the delivered unit. drive = hydraulic motor via chain or gear is the entry a workshop uses when it matches the concrete mixer drum to a host machine.
The rotating mixer drum, drum mixer attachment leaves the works with its measurement sheet, its parts list and the sign-off record together. On the concrete mixer drum, hydraulic circuit reads standard auxiliary, and the same value appears on the parts list.
Dimensions, circuit values and wear items are recorded as its own entry for this rotating mixer drum, drum mixer attachment so a later comparison isolates the item that changed. The discharge figure of hydraulic or manual tip yoke is written against this concrete mixer drum and repeated on the parts list.
The concrete mixer drum carries mounting = universal quick-attach plate, and that pair is the reference used during commissioning.
If a variant is requested, the discharge line for this rotating mixer drum, drum mixer attachment is reissued; the standard value here is hydraulic or manual tip yoke. Bush and pin sizes for the rotating mixer drum, drum mixer attachment appear on the spares page, so a local workshop can order without a sample.
A rotating mixer drum, drum mixer attachment intended for continuous duty is specified with a case-drain path, since a blocked drain shortens motor life sharply. The concrete mixer drum carries frame = tilting yoke with transport lock, and that pair is the reference used during commissioning.
If a variant is requested, the frame line for this rotating mixer drum, drum mixer attachment is reissued; the standard value here is tilting yoke with transport lock. Read drive as hydraulic motor via chain or gear on the rotating mixer drum, drum mixer attachment when the carrier chart is being checked.
Every concrete mixer drum leaves the works with a measurement sheet, and the receiving workshop can repeat each entry with ordinary tools. Before fabrication, hydraulic circuit is fixed at standard auxiliary for the concrete mixer drum so the interface can be drawn.
drum = welded cone-cylinder with internal fins is the entry a workshop uses when it matches the concrete mixer drum to a host machine.
Before dispatch the rotating mixer drum, drum mixer attachment is compared with its own frame entry of tilting yoke with transport lock. The concrete mixer drum is supplied with a measurement sheet, and each entry can be repeated at the receiving end with ordinary tools.
Buyers fitting this rotating mixer drum, drum mixer attachment to an older machine should confirm wedge wear on the coupler before relying on the published interface. On the comparison sheet, mounting appears as universal quick-attach plate, which is the value measured after assembly of the rotating mixer drum, drum mixer attachment.
Where the host machine differs, the interface rows for the rotating mixer drum, drum mixer attachment are reissued before fabrication begins. Read discharge as hydraulic or manual tip yoke on the rotating mixer drum, drum mixer attachment when the carrier chart is being checked.
The concrete mixer drum is confirmed against the load chart with the arms raised, since reach reduces usable capacity more than mass alone. Read drum as welded cone-cylinder with internal fins on the rotating mixer drum, drum mixer attachment: it is a build dimension, not a class average.
The concrete mixer drum carries drive = hydraulic motor via chain or gear, and that pair is the reference used during commissioning.
If a variant is requested, the drum line for this rotating mixer drum, drum mixer attachment is reissued; the standard value here is welded cone-cylinder with internal fins. Coupler size and thread type for the concrete mixer drum are named on the same row as the hydraulic supply figure.
The concrete mixer drum is verified against the load chart with the arms raised, since reach reduces usable capacity more than mass alone. Before fabrication, drive is fixed at hydraulic motor via chain or gear for the concrete mixer drum so the interface can be drawn.
The inspection record for the concrete mixer drum names the coupler type, the hose size and the number of independent hydraulic services. Case-drain requirements for the rotating mixer drum, drum mixer attachment are stated in writing, since a blocked drain shortens motor life sharply.
A rotating mixer drum, drum mixer attachment intended for continuous duty is specified with a case-drain path, since a blocked drain shortens motor life sharply. discharge = hydraulic or manual tip yoke is the entry a workshop uses when it matches the concrete mixer drum to a host machine.
A buyer comparing carriers will find discharge entered as hydraulic or manual tip yoke for this concrete mixer drum.
The workshop signs off mounting = universal quick-attach plate for this concrete mixer drum during the final inspection. The concrete mixer drum is supplied with hydraulic circuit recorded as standard auxiliary rather than as a class average.
The concrete mixer drum is gauged after painting, so the recorded dimensions describe the unit that actually reaches the site. The concrete mixer drum carries frame = tilting yoke with transport lock, and that pair is the reference used during commissioning.
Each row in the table records one decision about the tool, from its structure through to its connection points. Range figures describe the compact loader class in general, so the data plate on the actual machine remains the controlling reference. The Concrete Mixer Drum is the unit those rows belong to.
| Parameter | Value on this build | Checked with |
|---|---|---|
| Drum | Welded cone-cylinder with internal fins | Verified during commissioning |
| Drive | Hydraulic motor via chain or gear | Read from the carrier plate |
| Discharge | Hydraulic or manual tip yoke | Recorded on the parts list |
| Frame | Tilting yoke with transport lock | Verified during commissioning |
| Hydraulic circuit | Standard auxiliary | Confirmed on the interface drawing |
| Mounting | Universal quick-attach plate | Measured with a tape |
For procurement purposes frame is stated as tilting yoke with transport lock on the concrete mixer drum data sheet.
For this concrete mixer drum the receiving workshop measures hydraulic circuit against the stated standard auxiliary with a tape or gauge; no special equipment is needed. The rotating mixer drum, drum mixer attachment is specified with its centre of mass close to the plate, protecting stability on a short wheelbase carrier.
Wear items are listed apart from the structure on the rotating mixer drum, drum mixer attachment; mounting is recorded as universal quick-attach plate so the correct replacement can be identified. Wear edges on the rotating mixer drum, drum mixer attachment are bolted rather than welded, which keeps replacement a workshop task.
The concrete mixer drum is supplied with drum = welded cone-cylinder with internal fins on its measurement sheet, and that line is the one a buyer compares with the carrier chart. Carrier capacity, hydraulic output, mounting geometry and spares availability are the four columns of the check for this concrete mixer drum.
Only the standard build is described here: for the rotating mixer drum, drum mixer attachment, drive reads hydraulic motor via chain or gear and any change to the interface is issued as a separate row. The workshop signs off mounting = universal quick-attach plate for this concrete mixer drum during the final inspection.
Dimensions, circuit values and wear items are recorded as its own entry so a later comparison isolates the item that changed rather than the whole tool.
E-mail: sales@mingycn.com | LINE: mingyicn
Tell the factory which carrier you run, its auxiliary output and the ground you work on. Mounting geometry, hydraulic requirement and the build photographs for that exact tool are confirmed in the reply, with technical questions answered directly.
