Ripper, Tow Hitch and Lifting Hook Combination
The following specification is written for readers who already have a machine and need to establish fit. It covers construction, interface, hydraulic supply, load position and the service items that follow from each choice.
Before dispatch the multi-function toolbar, three-way implement frame is compared with its own tow entry of pin-type rear hitch. The multi-function toolbar, three-way implement frame data sheet gives shanks as removable clamped holders; a buyer can confirm the same figure on the finished tool.
If a variant is requested, the functions line for this multi-function toolbar, three-way implement frame is reissued; the standard value here is rip, tow, lift on one frame. Flow demand for rotating versions of the ripper, tow hitch and lifting hook combination is read at full engine speed rather than from pump displacement.
Steel grade and plate thickness for the ripper, tow hitch and lifting hook combination are logged on the build sheet, one by one from the wear items. Inspectors record shanks as removable clamped holders once the multi-function toolbar, three-way implement frame has been assembled and painted.
For procurement purposes mounting is stated as universal quick-attach plate on the ripper, tow hitch and lifting hook combination data sheet.
Procurement uses the mounting figure of universal quick-attach plate to identify this multi-function toolbar, three-way implement frame against other builds. The ripper, tow hitch and lifting hook combination is reviewed for hose abrasion at every pivot after the first working shift.
For procurement, the ripper, tow hitch and lifting hook combination is written down by measurable fields rather than by a general description of what it can do. The selection sheet for this multi-function toolbar, three-way implement frame puts tow at pin-type rear hitch; that figure is rechecked on the finished unit.
Spare edges and pins for the ripper, tow hitch and lifting hook combination are chosen from the dimensions above, not from a generic catalogue. A tape check on the ripper, tow hitch and lifting hook combination covers the envelope, the mounting face and the ground-level working width.
For procurement, the ripper, tow hitch and lifting hook combination is documented by measurable fields rather than by a general description of what it can do. A buyer comparing carriers will find lift entered as rated upper lifting eye for this ripper, tow hitch and lifting hook combination.
The selection sheet for this multi-function toolbar, three-way implement frame puts functions at rip, tow, lift on one frame; that figure is rechecked on the finished unit.
The ripper, tow hitch and lifting hook combination is weighed as built, and that mass is entered into the carrier chart before the load limit is set. The ripper, tow hitch and lifting hook combination is supplied with load rule recorded as one function loaded at a time rather than as a class average.
The inspection record for the ripper, tow hitch and lifting hook combination lists the coupler type, hose size and the number of independent hydraulic services. For the ripper, tow hitch and lifting hook combination, the load rule line reads one function loaded at a time and is verified with a tape or gauge at goods-in.
The multi-function toolbar, three-way implement frame is captured at goods-in against the same rows a buyer reads on this page. Procurement uses the lift figure of rated upper lifting eye to identify this multi-function toolbar, three-way implement frame against other builds.
A technician comparing two ripper, tow hitch and lifting hook combination builds normally starts with the wear parts list rather than with the overall width. The mounting figure of universal quick-attach plate is written against this ripper, tow hitch and lifting hook combination and repeated on the parts list.
The selection sheet for this multi-function toolbar, three-way implement frame puts shanks at removable clamped holders; that figure is rechecked on the finished unit.
Coupler size and thread type for the ripper, tow hitch and lifting hook combination are named on the same row as the hydraulic supply figure. The multi-function toolbar, three-way implement frame is drawn with the hose exit clear of the pivot arc, then that clearance is rechecked on the finished unit.
Dimensions, circuit values and wear items are noted as its own entry for this multi-function toolbar, three-way implement frame so a later comparison isolates the item that changed. Before fabrication, functions is fixed at rip, tow, lift on one frame for the ripper, tow hitch and lifting hook combination so the interface can be drawn.
The multi-function toolbar, three-way implement frame data sheet gives load rule as one function loaded at a time; a buyer can confirm the same figure on the finished tool. The multi-function toolbar, three-way implement frame is specified with its centre of mass close to the plate, protecting stability on a short wheelbase carrier.
Dimensions, circuit values and wear items are logged one by one for this multi-function toolbar, three-way implement frame so a later comparison isolates the item that changed. On the comparison sheet, shanks appears as removable clamped holders, which is the value measured after assembly of the multi-function toolbar, three-way implement frame.
On the comparison sheet, tow appears as pin-type rear hitch, which is the value measured after assembly of the multi-function toolbar, three-way implement frame.
The multi-function toolbar, three-way implement frame data sheet gives lift as rated upper lifting eye; a buyer can confirm the same figure on the finished tool. In the build record, mounting for the ripper, tow hitch and lifting hook combination is entered as universal quick-attach plate, and that entry is repeatable at goods-in.
For this multi-function toolbar, three-way implement frame the interface drawing shows the plate, the wedge pockets and the hose exit, and all three are taken on the delivered unit. Read tow as pin-type rear hitch on the multi-function toolbar, three-way implement frame: it is a build dimension, not a class average.
Spare parts for the multi-function toolbar, three-way implement frame are named by the entries on the sheet rather than by a photograph. For the multi-function toolbar, three-way implement frame, functions is fixed at rip, tow, lift on one frame before the mounting interface is drawn.
Every ripper, tow hitch and lifting hook combination leaves the works with a measurement sheet, and the receiving workshop can repeat each entry with ordinary tools. The selection sheet for this multi-function toolbar, three-way implement frame puts lift at rated upper lifting eye; that figure is rechecked on the finished unit.
For the ripper, tow hitch and lifting hook combination, the lift line reads rated upper lifting eye and is verified with a tape or gauge at goods-in.
The ripper, tow hitch and lifting hook combination is provided with a measurement sheet, and each entry can be repeated at the receiving end with ordinary tools. For the multi-function toolbar, three-way implement frame, shanks is fixed at removable clamped holders before the mounting interface is drawn.
On the ripper, tow hitch and lifting hook combination, relief pressure at the carrier has to sit above the working requirement and below the maximum rating of the tool. If the carrier differs, the load rule row for the ripper, tow hitch and lifting hook combination is reissued; the standard entry here is one function loaded at a time.
The table below lists the build and interface items that are verified with the machine. Figures shown as ranges are industry reference values for compact loaders rather than claims about a particular carrier; the carrier data plate always takes precedence. All of the rows refer to the Ripper, Tow Hitch and Lifting Hook Combination shown above.
| Parameter | Value on this build | Checked with |
|---|---|---|
| Functions | Rip, tow, lift on one frame | Read from the carrier plate |
| Shanks | Removable clamped holders | Checked at goods-in |
| Tow | Pin-type rear hitch | Read from the carrier plate |
| Lift | Rated upper lifting eye | Compared with the load chart |
| Load rule | One function loaded at a time | Confirmed on the interface drawing |
| Mounting | Universal quick-attach plate | Confirmed on the interface drawing |
On the comparison sheet, load rule appears as one function loaded at a time, which is the value measured after assembly of the multi-function toolbar, three-way implement frame.
Wear items are listed apart from the structure on the multi-function toolbar, three-way implement frame; tow is recorded as pin-type rear hitch so the correct replacement can be identified. Working width of the multi-function toolbar, three-way implement frame is matched to gate openings and transport limits before it is matched to engine power.
The ripper, tow hitch and lifting hook combination is supplied with lift = rated upper lifting eye on its measurement sheet, and that line is the one a buyer compares with the carrier chart. Procurement uses the tow figure of pin-type rear hitch to identify this multi-function toolbar, three-way implement frame against other builds.
Only the standard build is described here: for the multi-function toolbar, three-way implement frame, load rule reads one function loaded at a time and any change to the interface is issued as a separate row. Before dispatch the multi-function toolbar, three-way implement frame is compared with its own tow entry of pin-type rear hitch.
Start with rated operating capacity and the mounting entry of universal quick-attach plate; both are recorded for this ripper, tow hitch and lifting hook combination and both can be rechecked on arrival. The multi-function toolbar, three-way implement frame data sheet gives shanks as removable clamped holders; a buyer can confirm the same figure on the finished tool.
If the host machine differs from the class described here, the interface list is reissued for that carrier before fabrication starts. Nothing is assumed from a photograph.
E-mail: sales@mingycn.com | LINE: mingyicn
A short note with the carrier model, flow figure and working material is enough to start. The reply confirms the coupler geometry, circuit requirement and build photographs, and technical questions go straight to the workshop.
