Mini Excavator Specification Sheet

This class of machine is only useful if it says what is included. Two machines of the same size can differ in engine, undercarriage, cab and attachments, and the specification difference follows.

MINGYI specifications against a specification rather than issuing a flat list, because that is the only way the figure means anything.

What moves the specification

Engine make is the first variable, since the internationally known Japanese diesels carry a different effort from their Chinese equivalents.

Undercarriage type and cab or canopy follow, and the attachment package is the last and often the largest single addition.

How MINGYI specifications

Send the model size or the digging depth you need, the undercarriage type, the operator station preference and the attachments you want.

That turns into a firm specification covering the machine as specified and the shipping arrangement, rather than a range that has to be narrowed later.

Send MINGYI your requirement and we will return a specification for the machine as specified.

E-mail ：

Hiring versus owning the unit in daily use

The choice follows the hours. Work that fills a few weeks a year is usually better hired, while a machine of this size that would be on site most weeks starts to justify ownership once the transport and booking time is counted. Availability is part of the decision. Owning the equipment on site means it is there on the day the ground is ready; hiring means competing for the same machine at the same time as everyone else in the season.

Matching mini excavator specification sheet to ground conditions

Soft ground is a flotation problem, not a power problem. The machine itself on wide rubber tracks crosses lawn, sand and cultivated soil that would stop a narrower machine or a wheeled unit of the same capacity. Hard and abrasive ground reverses the specification. On rock, demolition rubble or sharp gravel, steel tracks with rubber blocks on the model in question survive conditions that cut a rubber belt quickly.

Quick coupler practice on mini excavator specification sheet

Couplers are specified early because they affect the arm and the hydraulic kit. Adding one to the machine in that duty after delivery means new pins, new hoses and a fitment session; adding it at build time is a line on the sheet. For a fleet that shares attachments between machines, a common coupler standard matters more than the coupler brand. The unit on the job that picks up the same tools as the larger machines keeps the rack usable across the yard.

Landscaping and ground care with mini excavator specification sheet

Landscape contractors use a machine built for the work for planting holes, pond excavation, grading and retaining work. The machine is light enough to cross finished lawn and narrow enough to work between established trees. On soft landscape work the surface is the constraint. The equipment in service on rubber tracks crosses turf without stripping it, which is why the same jobs are not given to a wheeled machine.

Orchard, vineyard and farm use of mini excavator specification sheet

Ditching, fertilising and drainage on farmland suit this class of machine because the work is spread over a large area in short bursts. The machine travels behind a pickup and works where it stops. Farms also use the unit in daily use for general maintenance - clearing a watercourse, repairing a track, loading a spreader. One carrier with a few attachments covers most of the jobs that would otherwise wait for a contractor.

OEM and fleet customisation of mini excavator specification sheet

Customisation also covers the specification sheet. A fleet buyer may want every equipment on site delivered with the same coupler, the same engine and the same tool kit so training and parts stock stay simple. Documentation can be prepared to suit the importer. Manuals, parts books and decal sets for a machine of this size can be supplied with the buyer's own branding where the order size justifies it.

Running mini excavator specification sheet in a rental fleet

The specification that rents best is usually the simplest one to explain at the counter. The machine itself with rubber tracks, a canopy and a coupler covers the majority of weekend and short-term hires. Fleet buyers also weigh transport. The model in question that a customer can tow on a normal licence and a standard trailer is a hire that does not need a delivery truck, which changes how often it goes out.

Track choice for the machine in that duty

Rubber tracks suit paved and landscaped ground because they spread the machine weight and leave the surface intact. Steel tracks with rubber blocks are specified where the ground is rougher or the working day is longer, and the choice can be made per machine rather than accepted as a factory default. Track type changes what the machine can cross and what it leaves behind. Buyers specify rubber for lawns, driveways and municipal work, and steel with rubber blocks for sites where sharp material would cut a rubber belt in a week.

Parts, service and support for the unit on the job

Engine parts availability usually drives the engine choice. A machine built for the work built with an engine the local network already carries is serviced from stock rather than from an international order. Remote support is handled by video. The equipment in service fault can often be diagnosed on a walk-around call with the panel open, which is faster than waiting for a visit and avoids shipping a part that is not needed.

Daily checks and maintenance on this class of machine

Daily maintenance on the unit in daily use is a short list: engine oil level, coolant, track tension, hydraulic oil level and a look at the hoses. Ten minutes at the start of the shift prevents most of the failures that stop a machine. Track tension is the item most often neglected. A machine of this size run with slack tracks wears the undercarriage and can throw a track on a turn; run too tight, the same components wear from the other direction.

Lifting and material handling with the equipment on site

Lifting with a machine built to dig needs a plan. The load, the radius and the ground under the model in question all matter, and the safe figure is the one on the chart rather than the one that looks possible. Ground condition under the machine is part of every lift. Soft or uneven support is the common factor in handling incidents, and checking it takes less time than recovering the machine itself that has settled.

Export packing and shipping of the machine in that duty

Machines leave the factory prepared for container or flat rack shipment. The unit on the job is normally shipped with the attachment set and the spare parts list agreed in advance so the container is planned once. Export documentation, decals and paint are settled before packing. Asking for them with the a machine built for the work order avoids a second handling session and keeps the machine on the booked vessel.

Getting the equipment in service through a narrow gap

Access decides the machine before output does. With this class of machine the limiting dimension is usually the widest point on the way in, so measuring the gate, the corridor and the turning space first saves a wasted delivery and a second visit. Contractors who buy the unit in daily use normally have one job in mind that nothing else reaches. The purchase order follows the access measurement, not the other way round, and the build sheet is then settled around it.

Operator technique for a machine of this size

Output on a compact machine comes from placement rather than power. An experienced operator keeps the equipment on site working inside the swing arc, positions once and digs a full run instead of repositioning for every bucket. The second habit is tool discipline. Running the machine itself with the right bucket width for the trench means less spoil, less reinstatement and a cleaner job than a wide bucket and a lot of trimming.

Engine options behind the model in question

Power unit selection is settled against the service network the buyer already uses. MINGYI offers Kubota D722, Kubota D902, YANMAR, Changchai, Laidong, Runtong, YARMAX, Youpu 2V80 and Youpu 195, so a fleet running one brand of engine can keep the same filters, the same parts supplier and the same mechanic. Two buyers can order the same the machine in that duty and receive different engines. The decision is rarely about peak power; it is about which parts counter is closest to the site and which engine the local mechanic already knows.

Working on slopes and uneven ground with the unit on the job

Ground that looks level often is not. A machine built for the work crossing a filled trench, a soft edge or a hidden void behaves differently from one on undisturbed ground, and those are the places worth walking before driving. Planning the direction of travel helps. Working so that the equipment in service is stable under load and not required to turn on a slope is a decision made before the job starts, not a correction made during it.

Specification data for this class of machine

Buyers comparing the unit in daily use usually start from four numbers - weight, digging depth, reach and transport width - because those are the ones that decide whether the machine can be delivered and whether it can do the job once it is there.

These are the reference figures for a machine of this size. MINGYI confirms the final build sheet, including engine and attachment choices, against the destination and the job list before production.

Cold weather and winter care for the equipment on site

A cold start is easier when the machine is prepared the night before. The routine that keeps the machine itself working through winter is mostly a matter of fuel, battery and patience in the first ten minutes of the day.

Fuel, oil and fluid quality for the model in question

Fluid quality is a storage problem before it is a machine problem. Water and sediment in a drum will find the injection system of the machine in that duty eventually, and a settling period is nothing compared with a pump.

Municipal crews work on streets, footpaths and parks where the public is present. The unit on the job is specified because it occupies little space, works inside a small exclusion zone and can be moved on a standard trailer. Drainage repair, tree planting, footway reconstruction and cemetery work are all within the range of a machine built for the work. The jobs are small individually and continuous across the year.

LINE （ ID ）： mingyicn

Related pages

how to choose a mini excavator · mini excavator for small sites · mini excavator and breaker package · PRODUCTS